I came home today from work and found that the secondary (emergency) drain pan under the interior condenser unit had bout a half inch of water in it. OK, seen this before. Hooked the wet/dry vac up to both primary and secondary drain lines to clear them. sucked all the water out of the drain pan. checked the float to male sure it reset to the down position.
The red light on the moisture sensing puck is still lit but I figured that is because it hasn't dried out yet.
Now the system keeps short cycling (on/off every 2-5 minutes). What am I missing here?
I can post photos if you think it'll help.
[link] [comments]
No comments:
Post a Comment